OWNER’S MANUAL TRINITY 7-DRAWER 48”W x 26”D STAINLESS STEEL WORKBENCH Model # TLS-4815
PARTS LIST Your TRINITY 7-Drawer 48”W x 26”D Stainless Steel Workbench should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online at www.trinityii.com (Help & More, Contact Us). You will need 10mm wrench (for handles) and 14mm wrench (for casters) for assembly.
ASSEMBLY INSTRUCTIONS STEP 1 Location of parts: KEYS (H) are in a plastic bag taped on top of the CASTERS (D/E/F) box in BOTTOM Drawer. LINERS (G) / SIDE HANDLES (B) and HANDLE BOLTS (C) are all in BOTTOM Drawer. STEP 2 Position SIDE HANDLE (B) over pre-installed nuts on side of WORKBENCH (A). Insert HANDLE BOLTS (C) through holes on SIDE HANDLE (B). Use a 10mm socket wrench to fully tighten HANDLE BOLTS (C) to WORKBENCH (A).
ASSEMBLY INSTRUCTIONS STEP 3 Lay WORKBENCH (A) on its backside. Two people are needed. Do NOT attempt this alone. Position LOCKING CASTERS (D) on side of WORKBENCH (A) of your choice and align holes to pre-installed nuts on underside of WORKBENCH (A). Use a 14mm socket wrench to fully tighten CASTER BOLT (F) to WORKBENCH (A). D (2) E (2) F (16) 14mm A E Repeat to install NON-LOCKING CASTERS (E). Notes: * Make sure to install both LOCKING CASTERS (D) on same side.
USAGE INSTRUCTIONS DRAWER REMOVAL Pull drawer out so that it is almost fully extended. On RIGHT-hand side, push black release lever DOWN. On LEFT-hand side, pull black release lever UP. While holding levers as instructed, pull drawer forward until released from slides attached to workbench (“Workbench Slides”). Note: Slides attached to drawer (“Drawer Slides”) are an integral part of drawer and must be removed along with drawer itself. DRAWER REPLACEMENT To replace drawer, pull slides out completely.
SERVICE PARTS LIST – TLS-4815 TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) LNA-06-001-4826 Wood Top 13) XBK-22-001-2618 26” Drawer Liner 2) ZSV-01-001-0612 Handle Bolt 14) XBK-22-001-4318 43” Drawer Liner 3) XSV-05-001-1100 Side Handle 15) ZSV-99-002-5020 Non-locking Caster 4) XBS-07-010-1503 15” Small Drawer 16) XBS-07-010-4409 44” Large Drawer 5) AMA-05-019-1400 14” Drawer Handle 17) AMA-05-019-4300 4
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
CARE AND MAINTENANCE • Avoid harsh, abrasive cleaners, and other corrosive chemicals. • Do not use scouring pad for cleaning. • Keep dry and avoid damp environments. • Use a quality stainless steel cleaner and follow instructions that come with the cleaner. Wipe ALONG the grain (NOT against). • Wood top can be cleaned with damp cloth and wiped dry immediately with dry cloth. If needed, solvent-based wood furniture cleaner can be used.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY 7-Drawer 48”W x 26”D Stainless Steel Workbench. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
9 © 2018 TRINITY - 800.985.
1 YEAR LIMITED WARRANTY TRINITY 7-Drawer 48”W x 26”D Stainless Steel Workbench Model # TLS-4815 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY 7-Drawer 48”W x 26”D Stainless Steel Workbench (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM – 5:00 PM (PST) www.trinityii.
