Everything in its place.
PARTS LIST Your TRINITY Professional 41 in / 104 cm Stainless Steel Tool Chest Combo should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online at www.trinityii.com (Help & More, Contact Us).
ASSEMBLY INSTRUCTIONS STEP 1 Be sure to assemble the SIDE HANDLES (C) on both the TOP CHEST (A) and BOTTOM CHEST (B) to make it easier to move your Tool Chest. A (1) B (1) C (4) D (24) 10mm E (2) F (2) G (16) 14mm Position the SIDE HANDLE (C) over the preinstalled nuts on the side of your Tool Chest. Insert HANDLE BOLTS (D) through holes on SIDE HANDLE (C). Use a 10mm wrench to tighten HANDLE BOLTS (D) to your Tool Chest. Repeat these instructions to install all the SIDE HANDLES (C).
ASSEMBLY INSTRUCTIONS STEP 3 After standing BOTTOM CHEST (B) back up, carefully place TOP CHEST (A) on top. Be sure to assemble the REAR BRACES (H) to secure the TOP CHEST (A) to the BOTTOM CHEST (B). H (2) I (8) Phillips Position the REAR BRACE (H) over the preinstalled nuts at the back edge where the two CHESTS (A+B) adjoin. Attach the REAR BRACE (H) using the BRACE SCREW (I). Tighten securely. Repeat these instructions to install both REAR BRACES (H).
USAGE INSTRUCTIONS DRAWER REMOVAL Pull the drawer out so that it is almost fully extended. On the RIGHT-hand slide, push the black release lever DOWN. On the LEFT-hand slide, pull the black release lever UP. While holding the levers as instructed, pull the drawer forward until released from the slides attached to the Tool Chest (“Tool Chest Slides”). Note: The slides attached to the drawer (“Drawer Slides”) are an integral part of the drawer and must be removed along with the drawer itself.
SERVICE PARTS LIST – TLS-0401: TOP CHEST TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) XBS-17-003-4118 Top Lid 10) XBK-22-001-2316 24” Drawer Liner 2) AMA-05-007-1250 12” Drawer Handle 11) XBK-22-001-4015 Top Liner 3) XBS-07-001-1206 12” Small Drawer 12) AMA-05-007-2425 24” Drawer handle 4) XBS-18-005-4118 Top Chest Body 13) ZSV-12-001-1575 Slide (drawer side) 5) ZSV-01-001-0612 Handle Bolt 14) ZSV-12-002
SERVICE PARTS LIST – TLS-0401: BOTTOM CHEST TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) CSV-11-001-0XXX Lock 10) ZSV-99-002-5020 Non-locking Caster 2) XBK-10-001-0XXX Key 11) XBS-18-006-4118 Bottom Chest Body 3) XBS-07-001-3803 Small Drawer 12) ZSV-12-001-1575 Slide (drawer side) 4) XBK-22-001-3716 Drawer Liner 13) ZSV-12-002-1575 Slide (tool chest side) 5) XBS-07-001-3806 Medium Drawer 14) ZSV-01-001-0
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY 41 in / 104 cm Stainless Steel Tool Chest Combo. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
9 © 2016 TRINITY - 800.985.
1 YEAR LIMITED WARRANTY TRINITY 41in / 104 cm STAINLESS STEEL TOOL CHEST COMBO Model # TLS-0401 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY 41 in / 104 cm Stainless Steel Tool Chest Combo (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 8:00 AM – 5:00 PM (PST) www.trinityii.
