Use and Care Manual

ASSEMBLY INSTRUCTIONS

STEP 7

D (1)

SER VICE"PARTS"LIST

12/3/145'6789:;<5=;<>?@;5A<9>?B;758C;5D9EE9F?GH5<;AEI@;:;G85AI<87J

(

Carefully set Deck Box upright.

Insert the BOTTOM (D) at an angle into

the Deck Box from the front. Lower one

end of BOTTOM (D) into the Deck Box

first, making sure to clear the GAS LIFTS

(G). Push BOTTOM (D) against the posts

in the BACK PANEL (C) and lower it until

that end is resting on the (3) support

blocks.

Then, slowly lower the other end and

gently drop the BOTTOM (D) and make

sure it rests evenly on the supports on

the FRONT PANEL (B).