Instructions / Assembly

2
4
ASSEMBLY INSTRUCTIONS
STEP 2
C (1) D (4)
E (1)
Completed STEP 2 assembly
1
Lay step 1 assembly on its side. Place CROSS BEAM (C)
between legs as shown in pic 1.
Align threaded inserts on CROSS BEAM (C) with holes
on LEGS (B). Insert (2) SCREWS (D) through LEGS (B)
into CROSS BEAM (C), then tighten with HEX KEY (L) as
shown in pic 2.
Flip table over and repeat for other side as shown in
pic 3.
2
D
E
3
C
© 2020 TRINITY - 800.985.5506