Instructions / Assembly

ASSEMBLY INSTRUCTIONS
Orient BACK PANEL (C) with hinges facing
up. Make sure that the side with blocks is
facing in. Align with LEFT SIDE PANEL (E).
Insert SIDE PANEL SCREWS (H) through
LEFT SIDE PANEL (E) and fasten them
tightly to BACK PANEL (C) with short end of
HEX KEY (K).
Align FRONT PANEL (B) with LEFT SIDE
PANEL (E). Make sure notched edges are
down and the LEFT SIDE PANEL (E) is
positioned with the blocks facing in. Gas
lift receiving nut should be away from the
FRONT PANEL (B).
Insert SIDE PANEL SCREWS (H) through
LEFT SIDE PANEL (E) and fasten them
tightly to FRONT PANEL (B) with short end
of HEX KEY (K).
Note: For ease of assembly, we
recommended one person hold the FRONT
PANEL (B) while a second person holds the
LEFT SIDE PANEL (E).
STEP 1
STEP 2
H (2) K (1)E (1)
B (1)
K (1)
© 2017 TRINITY - 800.985.5506
2
E
H
B
K
H (2)
C (1)
K
C
H
Notched Edges
Gas Lift
Receiving Nut