OWNER’S MANUAL TRINITY 32” x 16” Stainless Steel Utility Sink w/Pull-out Faucet Model # THA-0310 Important / Important / Importante FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES PARA INSTRUCCIONES DE ENSAMBLAJE RAPIDAS Y SENCILLAS EN 3D Direct ives int elligent es Inst rucciones Int eligent es DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE | DESCARGUE LA APLICACIÓN GRATUITA
PARTS LIST Your TRINITY Stainless Steel Utility Sink w/Pull-out Faucet should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online at www.trinityii.com (Help & More, Contact Us).
ASSEMBLY INSTRUCTIONS STEP 1 With two people, lay SINK (A) upside-down. Unscrew HEX SCREWS (I) that are preinstalled on Leg Collars on bottom of SINK (A) until LEGS (B) can be fully inserted. B (4) I (8) J (8) K (1) K 1 Insert LEGS (B) into Leg Collars. Tighten both HEX SCREWS (I) on each Leg Collar with HEX KEY (K). Place a SCREW CAP (J) over each HEX SCREW (I).
ASSEMBLY INSTRUCTIONS STEP 3 With two people, take Cross Beams assembly in STEP 2 and slide Connectors (G+H) over all LEGS (B). I (4) K (1) Use Alignment Stickers to help level out Cross Beams, by lowering Cross Beam assembly adjacent to stickers. Tighten HEX SCREW (I) on each Connector to LEGS (B) with HEX KEY (K). Alignment Sticker I K STEP 4 With two people, carefully turn sink rightside up, standing it upright. D (1) Unscrew large 3-3/8” Nut from bottom of DRAIN ASSEMBLY (D).
ASSEMBLY INSTRUCTIONS STEP 5 C Spray Head Unscrew Lock Nut from bottom of FAUCET ASSEMBLY (C) and remove Lock Nut, White Washer and Black Flat Gasket. From top side, make sure Metal Base w/ Gasket is on top of SINK (A) and all 4 hoses are straight and untangled. Insert FAUCET ASSEMBLY (C) through hole, first with Quick Connector hose, then hot and cold water supply hoses with metal fittings, finally the short hose with plastic cap.
ASSEMBLY INSTRUCTIONS STEP 6 Carefully move sink against wall at your desired location. If needed, use a pencil to mark off mounting height of BRACKET (L). L (1) Note: Bracket is to prevent sink tipping, NOT for mounting sink to a wall. Do NOT mount sink to a wall without legs. 5 N (2) N Position BRACKET (L) on wall, marking off fastening location on wall through holes on BRACKET (L). Drill holes in marked locations. Insert ANCHOR (N) completely into each drilled hole.
SERVICE PARTS LIST TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) XBS-19-007-1600 Bracket 9) XGL-13-013-1615 Short Cross Beam 2) XGR-01-032-0440 Anchor 10) XSV-01-039-0302 2-Way Connector 3) XSV-01-033-0440 Mounting Screw 11) XSV-01-040-0303 3-Way Connector 4) XBS-18-019-3216 Sink 12) XGL-13-013-3640 Long Cross Beam 5) XBK-23-005-0815 Screw Cap 13) XSV-01-034-0808 Hex Screw 6) XXX-97-001-0001 Hex Key
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
CARE AND MAINTENANCE • Avoid harsh, abrasive cleaners, and other corrosive chemicals. Do not leave salt in sink or near saltwater environment. • Rinse surface thoroughly with hot water after using soaps and detergents containing chlorides to prevent corrosion. • Do not use scouring pad, carbon steel brushes, or steel wool for cleaning. Iron particles left behind can lead to rust. • Avoid the use of oily rags or greasy cloths when wiping the surface.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY Stainless Steel Utility Sink w/Pull-out Faucet. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
1 YEAR LIMITED WARRANTY TRINITY Stainless Steel Utility Sink w/Pull-out Faucet Model # THA-0310 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY Stainless Steel Utility Sink w/Pull-out Faucet (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM – 5:00 PM (PST) www.trinityii.
