Instructions / Assembly

ASSEMBLY INSTRUCTIONS

Screw the TOP POLES (D) into the MIDDLE POLES

(E).

STEP 5

D (6)

Decide the position of MEDIUM SHELF (B) and SMALL

SHELVES (C) that will best fit your needs.

Starting with the lowest desired SHELF position, Place 1

pair of SLIP SLEEVES (J) on each of the (4) POLES for that

SHELF. Please make sure the arrow faces up and that the

word “TOP” is right side up. Make sure that the heights

are identical for each POLE.

Repeat Step 6 to install the next lowest SHELF as desired.

If you are installing the MEDIUM SHELF (B) above the

SMALL SHELF (C), please make sure that you place the

SLIP SLEEVES (J) at least 4 indentations above the SMALL

SHELF (C) so that the HANGING BAR (G+H) can fit

properly.

*Use a rubber mallet, if needed, to secure the SHELVES

(A+B+C).

STEP 6

J (24)B (1) C (2)