Instructions / Assembly

ASSEMBLY INSTRUCTIONS

Place the LARGE SHELF (A) on its side and slide the

(6) BOTTOM POLES (F) through the holes in the

LARGE SHELF (A). Make sure that the LARGE SHELF

(A) corner cylinders are positioned over the SLIP

SLEEVES (J).

Stand the unit upright.

*Note: The level side of the LARGE SHELF (A) is the

TOP side (the TRINITY logo on the corner cylinders

should be right-side up.)

**Use a rubber mallet, if needed, to secure the

LARGE SHELF (A).

STEP 3

A (1)

***For convenience, place BOTTOM POLES (F) with Locking Casters on the long side of the shelf if the

organizer will be pushed against a wall OR if the organizer is frequently rolled around like a cart, place

BOTTOM POLES (F) with Locking Casters on the side being pushed or pulled.

Screw the MIDDLE POLES (E) into the BOTTOM

POLES (F).

STEP 4

E (6)