Instructions / Assembly

ASSEMBLY INSTRUCTIONS
STEP 1
Place CABINET MOUNTING
TEMPLATE (F) inside your
cabinet. With a pencil, mark
locations to install screws.
Note: For easier installation
you can pre-drill a small hole at
each marked location.
Screw
holes
F
STEP 2
Identify LEFT & RIGHT SLIDES (B & C).
Note: FRONT end of each SLIDE (B & C)
has a black plastic cap.
Place LEFT & RIGHT SLIDES (B & C) in their
proper orientation and desired position
inside cabinet.
Align center of oval slots to your marking
in cabinet. Use self-tapping SCREWS (E)
to fasten LEFT & RIGHT SLIDES (B & C) in
your cabinet.
B
C
E
2
© 2022 TRINITY - 800.985.5506