Instructions / Assembly

ASSEMBLY INSTRUCTIONS

Slide the SHELF (E) over the top of the BOTTOM

POLES (A & B) onto the SLIP SLEEVES (I). Make sure

that the SHELF (E) corner cylinders are positioned over

the SLIP SLEEVES (I). Check to make sure the

TRINITY logo on the corner cylinders is right side up.

Repeat this step for the second SHELF (E).

*Note: The level side of the SHELF is the TOP side (the TRINITY

logo on the corner cylinders should be right-side up.)

**Use a rubber mallet, if needed, to secure the SHELVES (E).

STEP 2: INSTALLING SHELF

E (1)

After the first 2 SHELVES (E) are in place, screw the TOP

POLE (C) into the BACK BOTTOM POLE (B).

The tops of the TOP POLE (C) are indicated by the BLACK

END CAP.

STEP 3: INSTALLING TOP POLES

C (2)