Instructions / Assembly

ASSEMBLY INSTRUCTIONS

STEP 3

STEP 4

Place SHELF – LIP DOWN (E) on its side and slide (4) BOTTOM POLES (A)

through (4) corner cylinders of SHELF – LIP DOWN (E). Make sure the

corner cylinders are positioned over SLIP SLEEVES (I).

Slowly stand the unit upright.

*The level side of SHELF – LIP DOWN (E) is the TOP side (the TRINITY

logo on the corner cylinders should be right-side up).

**Use a rubber mallet, if needed, to secure SHELF (E).

E (1)

Screw TOP POLES (B) into BOTTOM POLES (A). Pole Connectors

are pre-installed in bottom of the TOP POLES (B).

The tops of TOP POLES (B) are indicated by BLACK END CAP.

B (4)