OWNER’S MANUAL TRINITY BASICS ECOSTORAGE™ 5-TIER NSF 24"x12"x55.
PARTS LIST Your TRINITY Basics EcoStorage™ 5-Tier Pantry Rack should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online at www.trinityii.com (Help & More, Contact Us). You will NOT need additional tools for assembly.
ASSEMBLY INSTRUCTIONS STEP 1 Screw each CASTER (H) and (I) into each BOTTOM POLE (A). Turn clockwise to screw in place. Make sure locking casters are on same side. Use provided caster wrench to tighten completely. Failure to do as instructed could result in caster stem breaking. A (4) H (2) I (2) J (1) A J H&I STEP 2 For easiest assembly, do NOT attach TOP POLES (C), MIDDLE POLES (B) and BOTTOM POLES (A) until instructed. Once connected, these will be posts for the rack.
ASSEMBLY INSTRUCTIONS STEP 3 Place SHELF (D) on its side and slide each BOTTOM POLE (A) through each corner cylinder on SHELF (D). Make sure SHELF (D) corner cylinders are positioned over SLIP SLEEVES (G). D (1) Stand unit upright. Note: • Use a rubber mallet, if needed, to secure SHELF (D). • For convenience, place BOTTOM POLES (A) with Locking Casters on shorter side of shelf. D STEP 4 Screw MIDDLE POLE (B) into BOTTOM POLE (A). Repeat for each remaining MIDDLE POLE (B).
ASSEMBLY INSTRUCTIONS STEP 5 In the same way as indicated in STEP 2 & 3, install 2 SHELVES (D) and then PUSH HANDLE (E). E G (36) D (4) E (1) Then install another 2 SHELVES (D) above PUSH HANDLE (E). Note: • PUSH HANDLE (E) height needs to be predetermined and assembled in right order. • Shelves are adjustable in 1” increments and can be placed as needed to best fit storage needs. • Use a rubber mallet, if needed, to secure SHELVES (D) and PUSH HANDLE (E).
ASSEMBLY INSTRUCTIONS Anti-tip Hardware Installation ANTI-TIP HARDWARE PACK (K) is used to protect against accidental tipping – especially due to curious children. Note that installing ANTI-TIP HARDWARE PACK (K) will no longer allow your rack to be mobile. Washer (2) Anchor (2) Screw (2) K (1) On Wood Stud Determine wood stud location and mark it on wall, level with topmost shelf. Do this on two different studs along top shelf. Place Shelving Rack into position.
SERVICE PARTS LIST – TBFZ-0955 TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) ZSV-03-079-2412 Shelf 8) XXX-97-002-0005 Wrench 2) ZSV-04-047-1650 Top Pole 9) ZSV-02-012-0003 Divider 3) ZSV-01-029-1922 Pole Connector 10) XBK-01-011-1936 Slip Sleeve 4) ZSV-04-048-1800 Middle Pole 11) ZSV-05-028-1200 Handle 5) ZSV-04-049-1825 Bottom Pole 12) ZSV-02-011-0001 Anti-tip Hardware Pack 6) ZSV-99-007-2008 Non-loc
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. Use the provided caster wrench to tighten casters completely. Failure to do as instructed could result in the caster stem breaking thereby causing the shelving rack to collapse. 3. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY Basics EcoStorage™ 5-Tier Pantry Rack. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
9 © 2019 TRINITY - 800.985.
1 YEAR LIMITED WARRANTY TRINITY Basics EcoStorage™ 5-Tier Pantry Rack Model # TBFZ-0955 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY Basics EcoStorage™ 5-Tier Pantry Rack (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM – 5:00 PM (PST) www.trinityii.
