Instructions / Assembly

ASSEMBLY INSTRUCTIONS

STEP 5: INSTALLLING TOP POLES

On POLE (A+B+C), place 1 pair of SLIP SLEEVES (E) at

the desired distance between shelves. Please make

sure the arrow faces up and that the word “TOP” is

right side up. Do this for each POLE (A+B+C), and

make sure that the heights are identical for each

POLE (A+B+C).

Lower SHELF (D) over the TOP POLES (C) so that the

corner cylinders of the SHELF (D) are positioned

over the SLIP SLEEVES (C).

Repeat Step 6 to install other SHELVES (D) as

desired.

*For safety and stability, the highest shelf should be

higher than the third horizontal indentation from

the top.

**Use a rubber mallet, if needed, to secure the

shelves.

STEP 6: INSTALLING SHELVES

C (4)

Screw the TOP POLE (C) into the MIDDLE POLE (B).

The tops of the TOP POLES (C) are indicated by the

BLACK END CAP.

E (16) D (2)