Use and Care Manual

© 2019 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
3
B (4)
D (8) C (1)
STEP 3
STEP 4
On BOTTOM POLE (A), place 1 pair of SLIP
SLEEVES (D) at desired height between SHELVES
(C). Make sure arrow faces up and word “TOP”
is right side up. Do this for each BOTTOM POLE
(A) and make sure height is identical for each
BOTTOM POLE (A).
Lower SHELF (C) over each BOTTOM POLE (A) so
corner cylinders of SHELF (C) are positioned over
SLIP SLEEVES (D).
Note:
• Shelves are adjustable in 1” increments and
can be placed as needed to best fit storage
needs.
• Use a rubber mallet, if needed, to secure
SHELF (C).
Screw TOP POLE (B) into
BOTTOM POLE (A).
Repeat for each remaining
TOP POLE (B).
Note: Top of each TOP POLE
(B) is indicated by a BLACK
END CAP.