Instructions / Assembly

ASSEMBLY INSTRUCTIONS

Screw TOP POLE (B) into BOTTOM POLE (A).

The tops of these poles are indicated by the

BLACK END CAP.

Repeat for remaining 3 TOP POLES (B).

B (4)

On POLE (A), place 1 pair of SLIP SLEEVES (D) at the desired

height between SHELVES (C). Please make sure the arrow

faces up and that the word “TOP” is right side up. Do this for

each POLE (A), and make sure that the heights are identical

for each POLE (A).

Lower SHELF (C) over BOTTOM POLES (A) so that the corner

cylinders of SHELF (C) are positioned over SLIP SLEEVES (D).

Repeat Step 3 to install other SHELVES (C) as desired.

Note: Use a rubber mallet, if needed, to secure SHELVES (C).

D (8) C (1)

STEP 3

STEP 4