Instructions / Assembly

ASSEMBLY INSTRUCTIONS

B (4)

D (8)

C (1)

STEP 3

STEP 4

On BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (D) at

desired height between SHELVES (C). Make sure arrow faces

up and word “TOP” is right side up. Do this for each BOTTOM

POLE (A), and make sure height is identical for each BOTTOM

POLE (A).

Lower SHELF (C) over each BOTTOM POLE (A) so corner

cylinders of SHELF (C) are positioned over SLIP SLEEVES (D).

Note:

• Shelves are adjustable in 1” increments and can be placed

as needed to best fit storage needs.

• Use a rubber mallet, if needed, to secure SHELF (C).

Screw TOP POLE (B) into BOTTOM POLE (A).

Repeat for each remaining TOP POLE (B).

Note: Top of each TOP POLE (B) is indicated

by a BLACK END CAP.