Warranty

ASSEMBLY INSTRUCTIONS
Lay TOP (A) on a clean surface with holes
facing up. Insert (2) DOWELS (CC) into
holes in the middle of TOP (A) as shown.
Take DRAWER DIVIDER (H) and orient the
notch toward the long strip of wood on
TOP (A). Align the holes to the DOWELS
(CC) and push DRAWER DIVIDER (H) firmly
onto TOP (A).
Insert (3) CAM LOCKS (MM) to DRAWER
DIVIDER (H) with pointer arrow pointing
down, toward the edge. Use
SCREWDRIVER (II) to turn CAM LOCKS
(MM) in clockwise direction until DRAWER
DIVIDER (H) is pulled tight with TOP (A).
STEP 9
Insert a DOWEL (CC) into the top of each leg.
Insert (4) DOWELS (CC) to the BACK FRAME
(F).
With two people, lift TOP (A) and align the
holes on the underside with the DOWELS (CC)
on the Kitchen Island Frame. Carefully lower
TOP (A) onto the Kitchen Island Frame.
Insert (3) CAM LOCKS (MM) each to LEFT SIDE
FRAME (B) and RIGHT SIDE FRAME (C) with
pointer arrow pointing up, toward the edge.
Insert (4) CAM LOCKS (MM) to BACK FRAME
(F). Use SCREWDRIVER (II) to turn CAM LOCKS
(MM) in clockwise direction until TOP (A) is
pulled tight with the frame.
STEP 10
MM (3)
H (1)
II (1)
II
CC
A
CC (8) II (1)
© 2017 TRINITY - 800.985.5506
7
II
MM
CC
H
B
CC (2)
MM
MM (10)
F
C