Warranty

© 2017 TRINITY - 800.985.5506
6
ASSEMBLY INSTRUCTIONS
With two people, carefully stand partially
assembled Kitchen Island upright.
Take (2) HANDLE SCREWS (KK) and insert
them through the holes on the RIGHT SIDE
FRAME (C) from the inside. Screw them
into HANDLE (JJ) and tighten HANDLE
SCREWS (KK) with SCREWDRIVER (II).
Repeat to install second HANDLE (JJ) on
LEFT SIDE FRAME (B).
By hand, screw (5) HANGER STUDS (DD)
into insert nuts on LEFT SIDE FRAME (B) and
screw (2) HANGER STUDS (DD) into insert
nuts on RIGHT SIDE FRAME (C).
Take a NON-LOCKING CASTER (EE) and insert
threaded stem through WASHER (GG) and
screw into one of the rear legs. Tighten with
WRENCH (HH). Repeat with the other NON-
LOCKING CASTER (EE).
Take a LOCKING CASTER (FF) and insert
threaded stem through WASHER (GG) and
screw into one of the front legs. Tighten with
WRENCH (HH). Repeat with the other
LOCKING CASTER (FF).
Note: Make sure LOCKING CASTERS (FF) are
on the same side.
Use the provided caster wrench to tighten
completely. Failure to do as instructed could
result in the caster stem breaking.
STEP 7
STEP 8
GG (4) HH (1)
FF (2)
EE (2)
FF
EE
HH
GG
KK (4) II (1)
JJ (2)
DD (7)
DD
KK
II
JJ
C
B
JJ
DD
Hand