Instructions / Assembly

FRONT

BACK

INSTALLATION INSTRUCTIONS – In Cabinet

Place CABINET MOUNTING TEMPLATE (G) inside your

cabinet. Using a pencil, mark the location where you plan

to install the CABINET SCREWS (F).

• Note: To ease the installation you can pre-drill small

holes at the marked locations.

Identify LEFT & RIGHT SLIDES (B) & (C).

• Note that the BACK end of each SLIDE (B) & (C) has a black tip

and the FRONT end does NOT.

Place LEFT & RIGHT SLIDES (B) & (C) in their proper orientation

and desired position inside the cabinet.

B (1) C (1)

F (4)

G (1)

STEP 1

STEP 2

Extend the SLIDES (B) & (C) slightly and align the center of the oval slots to your marking in the cabinet.

Use the self-tapping CABINET SCREWS (F) to fasten the LEFT & RIGHT SLIDES (B) & (C) in your cabinet.