Instructions / Assembly
© 2018 TRINITY - 800.985.5506
Your TRINITY 2-Tier Sliding Wire Drawer should include the following parts. Please inspect box contents
to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online
at our customer center at www.trinityii.com.
You will need a Phillips screwdriver for assembly. A rubber mallet is also recommended.
Note: There are two options for installation:
1) In cabinet – go to page 2-3
2) On wire rack – go to page 4-6
PARTS LIST
1
LOWER DRAWER (2)
A
LEFT SLIDE (1)
B
RIGHT SLIDE (1)
C
D
F
PLATE
SCREW (4)
G
CABINET
SCREW (4)
H
CABINET MOUNTING
TEMPLATE (1)
CONNECTOR (4)
RACK PLATE (4)
E
Used when installing in cabinet
Used when installing on wire rack