Installation Guide

ASSEMBLY INSTRUCTIONS
Turn the BASE (B) with CASTERS (D) right-
side up, and insert the PNEUMATIC (C)
cylinder into the center ring. Push down firmly,
and make sure that the PNEUMATIC (C)
cylinder is straight.
Lay the BASE (B) upside down. Screw in
the CASTERS (D). Make sure to use the
provided WRENCH (E) to tighten the
CASTERS (D) in all the way.
Use the provided caster wrench to
tighten completely. Failure to do as
instructed could result in the caster
stem breaking.
STEP 1
STEP 2
D (4) E (1)
B (1)
C (1)
© 2016 TRINITY - 800.985.5506
3
B
E
D
C