Warranty

ASSEMBLY INSTRUCTIONS

Feet Levelers are already screwed into BOTTOM POLES (A).

Adjust as needed to ensure your shelving rack is level.

D (24) C (3)

On POLE (A+B), place 1 pair of SLIP SLEEVES (D) at the desired

height between SHELVES (C). Please make sure the arrow

faces up and that the word “TOP” is right side up. Do this for

each POLE (A+B), and make sure that the heights are

identical for each POLE (A+B).

Lower SHELF (C) over TOP POLES (B) so that the corner

cylinders of SHELF (C) are positioned over SLIP SLEEVES (D).

Repeat Step 5 to install other SHELVES (C) as desired.

Note: Use a rubber mallet, if needed, to secure SHELVES (C).

STEP 5

STEP 6