Instruction Manual

17
CHANGING THE TIME AND DATE ON THE PRINT-OUT
The date and time can be printed together with the weight information.
 Press the key for 6 seconds.
 The display will show “ho_00” or the previous hour time setting, with the right
digit flashing.
 To accept the old value press ENTER ().
 Or
 Press the  key to go up a value or press the  key to go down a value until the
required value is reached.
 Press  to change to the next digit and use the  or  key to change the value until
the required value is reached.
 To accept the new value press ENTER ().
 The display will show “m_00” or the previous minute time setting, with the right
digit flashing.
 Repeat the above procedure to accept or change the minute setting.
 The display will show “dA_00” or the previous date of the month setting, with
the right digit flashing.
 Repeat the above procedure to accept or change the date of the month setting.
 The display will show “m_00” or the previous month setting, with the right digit
flashing.
 Repeat the above procedure to accept or change the month setting.
 The display will show “YE_00” or the previous year setting, with the right digit
flashing.
 Repeat the above procedure to accept or change the year setting.
 The indicator will return to normal weighing mode.