ro u n d t h e w or acc ur ea ld at si nc e 1 897 User’s Guide EZ-Bar™ Livestock Scale WEIGH BARS AND DIGITAL INDICATOR WB-40 Weigh Bars TS-700 WB Digital Indicator Guide version 1.
EZ-Bar™ Livestock Weighing System USER’S GUIDE Table of Contents Digital Indicator Model TS-700 WB .................................................... Overview ....................................................................................... Battery Charging and Battery Operation ...................................... Digital Display/Readout................................................................. Keypad Keys and Functions .........................................................
EZ-Bar™ Livestock Weighing System USER’S GUIDE 1 Digital Indicator Backlit LCD Digital Display/Readout Lock Down Knob Stainless Steel Enclosure NEMA 4X Washdown Rated Keypad Keys AC Adapter Connection Mounting Bracket Weigh Bar Connections Digital Display/Readout Low Battery Icon ( ) Flashes to indicate the battery power is low. After approximately 20 hours of continuous batterypowered operation, the low battery icon will flash for several minutes before the scale powers off.
EZ-Bar™ Livestock Weighing System 2 USER’S GUIDE Keypad Keys and Functions (cont’d) Gross Displays Gross Weight When Tare Weight Has Been Added Press to momentarily display gross weight. Tare Enters a Tare Weight To display the net weight in a container, place the empty container on the scale, and press the Tare key. Place the container and contents on the scale. Net weight will display. Zero Zeros Out the Indicated Weight Press to return the scale to no (zero) indicated weight.
EZ-Bar™ Livestock Weighing System USER’S GUIDE 3 Digital Indicator Connections Digital Indicator Weigh Bar Cable Sockets Connect & Test the Components Before fully installing the scale, test the system to assure that no damage occurred during shipping. CONNECT THE COMPONENTS 1) Place all the components near to each other. Place the weigh bars close together so that weight can be placed on both bars at the same time.
EZ-Bar™ Livestock Weighing System 4 USER’S GUIDE Setting Up the Weigh Bars Using the Scale FOUNDATION The weigh bars require a flat, solid foundation on which to sit. Typically, a concrete pad is preferable. 110 VAC POWER When not operating on battery power, it is recommended that the indicator be plugged into 110 VAC to maintain a full charge in the battery. NOTE Avoid connecting to 110 VAC with an overly long extension cord, as it will result in inconsistent voltage to the scale.
EZ-Bar™ Livestock Weighing System System Specifications STANDARD CAPACITY 5,000 lb x 1 lb NOTE If specified by the purchaser, the scale’s capacity and divisions may be different than the standard configuration.
EZ-Bar™ Livestock Weighing System 6 DIMENSIONS WB-40 Weigh Bar Dimensions End View TS-700 WB Digital Indicator Dimensions Front View 7 7/8” 4” 2 3/8” 3 1/2” to 4 1/4” 5 3/4” ON OFF Hold Total kg/lb Gross Tare Zero Print 8 1/2” 6 1/4” www.trinerscale.com 6 1/4” diameter height-adjustable feet Top View Internally mounted 3/8” nut, #13 thread Side View 2 1/4” 39.75” 37” 1 1/2” 2 3/4” Feet have easily accessed mounting holes. Cable length is 20 ft.
EZ-Bar™ Livestock Weighing System Issue Low battery icon ( TROUBLE SHOOTING 7 Recommendations ) flashes. Indicator displays a weight after the animal has left the scale. Recharge the battery. Plug the indicator into 110 VAC for 18+ hours (using the included AC adapter). When not operating under battery power, it is recommended that the indicator remains plugged in to 110 VAC. This will keep a full charge in the battery.
EZ-Bar™ Livestock Weighing System 8 WARRANTY TRINER SCALE & MFG. CO. LIMITED WARRANTY What is Covered: Triner Scale & Mfg. Co. Inc. warrants to the first end user customer of the Triner Scale product enclosed with this limited warranty statement that the product, if purchased and used in the United States, conforms to the manufacturer’s specifications and will be free from defects in workmanship and materials for a period of one (1) year from the date of original purchase.
Triner Scale and Manufacturing Company, Inc. 8411 Hacks Cross Road Olive Branch, MS 38654 Tel: (662) 890-2385 Fax: (662) 890-2386 Toll Free: (800) 238-0152 Email: info@trinerscale.com www.trinerscale.