User Manual

TMCS-40 Hardware Manual • Hardware Version V1.00 | Document Revision V1.20 • 2019-JUL-01

5 / 12

2.2 Signals and Connection

Pin Number Color Signal Name

1 Red VCC

2 Black GND

3 White A+

4 White/Black A-

5 Green B+

6 Green/Black B-

7 Yellow Z+

8 Yellow/Black Z-

9 Blue Shield

Table 5: Connector and cable pinning and signals

The required encoder cable connector is a Molex type 5023800900 or type 510210900 CLIK-MATE

™

crimp

housing using Molex type 5023810000 CLIK-MATE™ crimp terminals.

Figure 1: Connection and circuit diagram for the line driver outputs

Terms of delivery and rights to technical change reserved.

Download newest version at www.trinamic.com