User Manual

TMCM-6213 CoE Firmware Manual • Firmware Version V1.09 | Document Revision V1.07 • 2019-MAY-16
36 / 116
Object Description
Index Name Object Type Data Type
208C
h
Velocity Dimension Index Variable UNSIGNED8
Table 66: Object Description (208C
h
)
Entry Description
Sub-index Access PDO Mapping Value Range Default Value
0 rw no 0/181 181
Table 67: Entry Description (208C
h
)
4.2.18 Object 208E
h
: Acceleration Dimension Index
With this object, the unit for acceleration can be read out. The unit can be set using object 208C
h
. Object
208E
h
reads 0 when internal units are selected and 179 when PPS/s is selected.
Object Description
Index Name Object Type Data Type
208E
h
Acceleration Dimension Index Variable UNSIGNED8
Table 68: Object Description (208E
h
)
Entry Description
Sub-index Access PDO Mapping Value Range Default Value
0 ro no 0/179 179
Table 69: Entry Description (208E
h
)
4.2.19 Object 2092
h
: Chopper Blank Time
This object serves for selecting the comparator blank time. This time needs to safely cover the switching
event and the duration of the ringing on the sense resistor. For low current drivers, a setting of 1 or 2 is
good. For higher current applications a setting of 2 or 3 will be required.
Object Description
Index Name Object Type Data Type
2092
h
Chopper Blank Time Variable UNSIGNED8
Table 70: Object Description (2092
h
)
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com