User Manual

TMCM-3351 Hardware Manual • Hardware Version V1.00 | Document Revision V0.91 • 2017-JUL-11
20 / 31
speeds, the bus should be properly terminated at both ends. The TMCM-3351does not integrate any
termination resistor. Termination resistor (120 Ohm) maybe added externally at both ends of the
bus or the on-board termination maybe activated by adding a jumper (see 5).
©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com
Read entire documentation.