User Manual

TMCM-3351 Hardware Manual • Hardware Version V1.00 | Document Revision V0.91 • 2017-JUL-11
17 / 31
6 LEDs
Both on-board LEDs (one green and one red) are connected directly to the on-board microcontroller.
Therefore, function of the LEDs is depending on firmware.
Status Label Description
LED Status (green) STATUS with TMCL firmware:
LED flashing: normal operation
LED permanently on: bootloader mode incl. firmware update
LED flashing fast: reset to factory default settings
LED Error (red) ERR with TMCL firmware:
LED off: normal operation
LED permanently on: error
Table 17: LED description
LED „Status“ (green)
LED „Error“ (red)
Figure 6: TMCM-3351 LEDs
©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com
Read entire documentation.