User Manual

TMCM-3351 TMCL

™

Firmware Manual • Firmware Version V1.11 | Document Revision V1.06 • 2019-APR-26

40 / 144

Analog Inputs in Bank 1

Port Command Range

ANA0 GIO 0, 1 0. . . 1023

ANA1 GIO 1, 1 0. . . 1023

ANA2 GIO 2, 1 0. . . 1023

ANA3 GIO 3, 1 0. . . 1023

Supply Voltage (ADC value) GIO 4, 1 0. . . 1023

Temperature (ADC value) GIO 5, 1 0. . . 1023

INP6 GIO 6, 1 0. . . 1023

INP7 GIO 7, 1 0. . . 1023

Supply Voltage GIO 8, 1 [1/10V]

Temperature GIO 9, 1 [°C]

Bank 2 – States of the Digital Outputs

The states of the output lines (that have been set by SIO commands) can be read back using bank 2.

Digital Outputs in Bank 2

Port Command Range

OUT0 GIO 0, 2 0/1

OUT1 GIO 1, 2 0/1

OUT2 GIO 2, 2 0/1

OUT3 GIO 3, 2 0/1

OUT4 GIO 4, 2 0/1

OUT5 GIO 5, 2 0/1

OUT6 GIO 6, 2 0/1

OUT7 GIO 7, 2 0/1

State of the ENABLE Input

To query the state of the ENABLE input use GIO 10, 0. The return value will be 1 when enabled and 0 when

not enabled.

Terms of delivery and rights to technical change reserved.

Download newest version at www.trinamic.com