User Manual

TMCM-3314, TMCM-3315 Hardware Manual (V1.00 / 2018-APR-30) 13
Copyright © 2016-2018, TRINAMIC Motion Control GmbH & Co. KG
1
5
6
10
Pin
Label
Direction
Description
1
+5V_OUT
Power output
Connected to the on-board +5V auxiliary DC/DC converter.
All +5V_OUT power supply outputs together on the 3 REF
/ HOME, 3 Encoder connectors, Output connector and this
Input connector may draw up-to 1A (e.g. 100mA per
encoder and up-to 20mA per REF / HOME switch).
2
AIN0
Input
Analog input channel 0 (nom. 0..10V)
3
AIN1
Input
Analog input channel 1 (nom. 0..10V)
4
AIN2
Input
Analog input channel 2 (nom. 0..10V)
5
AIN3
Input
Analog input channel 3 (nom. 0..10V)
6
GND
Power
Supply and signal ground
7
GND
Power
Supply and signal ground
8
GND
Power
Supply and signal ground
9
GND
Power
Supply and signal ground
10
GND
Power
Supply and signal ground
Table 5.7: Interface Brick: Input connector
5.2.4 Outputs
The TMCM-3314 / TMCM-3315 offer four digital outputs (open-drain). The four outputs are available via one 8 pin
Molex MicroFit™ connector (Molex part no. 43045-0812). Mating connector housing e.g. Molex 43025-0800, contacts
Molex 43030-0007. Please note that there are alternative options available from Molex for both, mating housing
and contacts.
1
4
5
8
Pin
Label
Direction
Description
1
OUT0
Output
Open-drain output channel 0
2
OUT1
Output
Open-drain output channel 1
3
OUT2
Output
Open-drain output channel 2
4
OUT3
Output
Open-drain output channel 3
5
+5V_OUT
Power output
Connected to the on-board +5V auxiliary DC/DC converter.
All +5V_OUT power supply outputs together on the 3 REF
/ HOME, 3 Encoder connectors, Input connector and this
Output connector may draw up-to 1A (e.g. 100mA per
encoder and up-to 20mA per REF / HOME switch).
6
+5V_OUT
Power output
Connected to the on-board +5V auxiliary DC/DC converter.
All +5V_OUT power supply outputs together on the 3 REF
/ HOME, 3 Encoder connectors, Input connector and this
Output connector may draw up-to 1A (e.g. 100mA per
encoder and up-to 20mA per REF / HOME switch).
7
+5V_OUT
Power output
Connected to the on-board +5V auxiliary DC/DC converter.
All +5V_OUT power supply outputs together on the 3 REF
/ HOME, 3 Encoder connectors, Input connector and this
Output connector may draw up-to 1A (e.g. 100mA per
encoder and up-to 20mA per REF / HOME switch).
8
+5V_OUT
Power output
Connected to the on-board +5V auxiliary DC/DC converter.
All +5V_OUT power supply outputs together on the 3 REF
/ HOME, 3 Encoder connectors, Input connector and this
Output connector may draw up-to 1A (e.g. 100mA per
encoder and up-to 20mA per REF / HOME switch).
Table 5.8: Interface Brick: Output connector