Datasheet

TMCM-3314 TMCL

™

Firmware Manual • Firmware Version V1.09 | Document Revision V1.07 • 2017-DEC-01

36 / 109

Digital Outputs in Bank 2

Port Command Range

OUT0 SIO 0, 2, <value> 0/1

OUT1 SIO 1, 2, <value> 0/1

OUT2 SIO 2, 2, <value> 0/1

OUT3 SIO 3, 2, <value> 0/1

Special case: SIO 255, 2, <x> can be used to change all general purpose digital output lines simulaneously.

The value <x> will then be interpreted as a bit vector where each bit represents one of the digital outputs.

The value <x> can also be -1. In this case, the value will be taken from the accumulator register. The

following program can be used to copy the states of the input lines to the output lines:

Loop:

GIO 255, 0

SIO 255, 2, -1

JA Loop

Terms of delivery and rights to technical change reserved.

Download newest version at www.trinamic.com