User Manual

TMCM-3313 CoE Firmware Manual • Firmware Version V1.01 | Document Revision V1.02 • 2016-NOV-29
61 / 110
Entry Description
Sub-index Access PDO Mapping Value Range Default Value
0 rw no 0 0
Table 167: Entry Description (605B
h
)
5.1.3 Object 605C
h
: Disable operation option code
This object indicates what action is performed if there is a transition from operation enabled state to
switched on state. The disable operation option code always has the value 1 as only this is supported. The
slow down ramp is the deceleration value of the used mode of operation.
Value Definition
Value Definition
1 Slow down on slow down ramp
Table 168: Value Description (605C
h
)
Object Description
Index Name Object Type Data Type
605C
h
Disable operation option code Variable UNSIGNED16
Table 169: Object Description (605C
h
)
Entry Description
Sub-index Access PDO Mapping Value Range Default Value
0 rw no 1 1
Table 170: Entry Description (605C
h
)
5.1.4 Object 605D
h
: Halt option code
This object indicates what action is performed when the halt function is executed. The slow down ramp is
the deceleration value of the used mode of operation. The halt option code always has the value 1 as only
this is supported.
Value Definition
Value Definition
1 Slow down on slow down ramp and stay in operation enabled
Table 171: Value Description (605D
h
)
©2016 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com
Read entire documentation.