User Manual

TMCM-3313 CoE Firmware Manual • Firmware Version V1.01 | Document Revision V1.02 • 2016-NOV-29
56 / 110
Entry Description
Sub-index Access PDO Mapping Value Range Default Value
0 ro no 0. . . 8 8
Table 148: Entry Description (2107
h
)
4.2.58 Object 210B
h
: Step Counter
This object shows the overall number of microsteps done by this motor so far. The value can be read as a
64 bit value (sub-index 3) or split into two 32 bit values (sub-index 1 and sub-index 2).
Object Description
Index Name Object Type Data Type
210B
h
Step Counter Variable RECORD
Table 149: Object Description (210B
h
)
Entry Description
Sub-index Description Access PDO Mapping Value Range Default Value
1 Lower 32 Bits ro no 0. . . ffffffff
h
0
2 Higher 32 Bits ro no 0. . . ffffffff
h
0
3 64 Bit Value ro no 0. . . ffffffffffffffff
h
0
Table 150: Entry Description (210B
h
)
4.2.59 Object 2120
h
: Closed-loop Initialization Flag
The closed-loop intialization flag reads 1 when closed-loop is active and the initialzation of closed-loop has
finished. Otherwise this object reads 0.
Object Description
Index Name Object Type Data Type
2120
h
Closed Loop Intialization Flag Variable UNSIGNED8
Table 151: Object Description (2120
h
)
Entry Description
Sub-index Access PDO Mapping Value Range Default Value
0 ro no 0/1 —
Table 152: Entry Description (2120
h
)
©2016 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com
Read entire documentation.