User Manual
TMCM-3230 Hardware Manual • Hardware Version V1.30 | Document Revision V1.20 • 2019-MAR-01
12 / 22
4.4 LEDs
The TMCM-3230 offers two LEDs: one green and one red LED. Both LEDs are connected to the processor.
Function of the LEDs depends on the firmware version / type of firmware (e.g. TMCL / CANopen). See
figure 10 for the LED location.
Green LEDRed LED
Figure 10: TMCM-3230 Location of LEDs
Status LEDs with TMCL Firmware
Green LED Red LED TMCL Firmware
Blinking Off Operational, firmware is running.
On On Bootloader / firmware update mode.
Off Off Power Off
Table 3: Status LEDs with TMCL Firmware
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com