User Manual

TMCM-3230 CANopen
®
Firmware Manual • Firmware Version V3.21 | Document Revision V1.05 • 2018-JAN-10
69 / 118
Value Definition
Bit Mode
0 Profile position mode (pp)
1 Velocity mode (vl)
2 Profile velocity mode (pv)
3 Torque mode (tq)
4 Reserved
5 Homing mode (hm)
6 Interpolated position mode (ip)
7 Cyclic synchronous position mode (csp)
8 Cyclic synchronous velocity mode (csv)
9 Cyclic synchronous torque mode (cst)
Table 201: Value Definition (6502
h
)
Object Description
Index Name Object Type Data Type
6502
h
Supported drive modes Variable UNSIGNED32
Table 202: Object Description (6502
h
)
Entry Description
Sub-index Access PDO Mapping Value Range Default Value
0 ro no UNSIGNED32 Depends on supported modes.
Table 203: Entry Description (6502
h
)
©2018 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com