User Manual
Table Of Contents
- 1 Features
- 2 First Steps with TMCL
- 3 TMCL and the TMCL-IDE — An Introduction
- 3.1 Binary Command Format
- 3.2 Reply Format
- 3.3 Standalone Applications
- 3.4 TMCL Command Overview
- 3.5 TMCL Commands by Subject
- 3.6 Detailed TMCL Command Descriptions
- 3.6.1 ROR (Rotate Right)
- 3.6.2 ROL (Rotate Left)
- 3.6.3 MST (Motor Stop)
- 3.6.4 MVP (Move to Position)
- 3.6.5 SAP (Set Axis Parameter)
- 3.6.6 GAP (Get Axis Parameter)
- 3.6.7 SGP (Set Global Parameter)
- 3.6.8 GGP (Get Global Parameter)
- 3.6.9 STGP (Store Global Parameter)
- 3.6.10 RSGP (Restore Global Parameter)
- 3.6.11 RFS (Reference Search)
- 3.6.12 SIO (Set Output)
- 3.6.13 GIO (Get Input)
- 3.6.14 CALC (Calculate)
- 3.6.15 COMP (Compare)
- 3.6.16 JC (Jump conditional)
- 3.6.17 JA (Jump always)
- 3.6.18 CSUB (Call Subroutine)
- 3.6.19 RSUB (Return from Subroutine)
- 3.6.20 WAIT (Wait for an Event to occur)
- 3.6.21 STOP (Stop TMCL Program Execution – End of TMCL Program)
- 3.6.22 SCO (Set Coordinate)
- 3.6.23 GCO (Get Coordinate)
- 3.6.24 CCO (Capture Coordinate)
- 3.6.25 ACO (Accu to Coordinate)
- 3.6.26 CALCX (Calculate using the X Register)
- 3.6.27 AAP (Accu to Axis Parameter)
- 3.6.28 AGP (Accu to Global Parameter)
- 3.6.29 CLE (Clear Error Flags)
- 3.6.30 EI (Enable Interrupt)
- 3.6.31 DI (Disable Interrupt)
- 3.6.32 VECT (Define Interrupt Vector)
- 3.6.33 RETI (Return from Interrupt)
- 3.6.34 Customer specific Command Extensions (UF0…UF7 – User Functions)
- 3.6.35 Request Target Position reached Event
- 3.6.36 TMCL Control Commands
- 4 Axis Parameters
- 5 Global Parameters
- 6 Hints and Tips
- 7 TMCL Programming Techniques and Structure
- 8 Figures Index
- 9 Tables Index
- 10 Supplemental Directives
- 11 Revision History
TMCM-3212 TMCL
™
Firmware Manual • Firmware Version V1.07 | Document Revision V1.04 • 2017-JUN-08
100 / 103
9 Tables Index
1 Most important Axis Parameters . . . 8
2 TMCL Command Format . . . . . . . . 11
3 TMCL Reply Format . . . . . . . . . . . 12
4 TMCL Status Codes . . . . . . . . . . . 12
5 Overview of all TMCL Commands . . . 15
6 Motion Commands . . . . . . . . . . . 15
7 Parameter Commands . . . . . . . . . 16
8 Branch Commands . . . . . . . . . . . 16
9 I/O Port Commands . . . . . . . . . . 17
10 Calculation Commands . . . . . . . . 17
11 Interrupt Processing Commands . . . 18
12 Interrupt Vectors . . . . . . . . . . . . 19
13 TMCL Control Commands . . . . . . . 71
14 All TMCM-3212 Axis Parameters . . . 80
15
Meaning of the Letters in the Access
Column . . . . . . . . . . . . . . . . . . 81
16
All Global Parameters of the TMCM-
3212 Module in Bank 0 . . . . . . . . . 84
17 User Variables in Bank 2 . . . . . . . . 84
18 Interrupt Parameters in Bank 3 . . . . 85
19 Reference Search Modes . . . . . . . . 86
20
coolStep Adjustment Points and
Thresholds . . . . . . . . . . . . . . . . 93
21 Firmware Revision . . . . . . . . . . . 103
22 Document Revision . . . . . . . . . . . 103
©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com
Read entire documentation.