User Manual

TMCM-1311 V1.2 Hardware Manual (Rev. 1.12 / 2013-JUL-05) 7
www.trinamic.com
3.2 Connectors
The TMCM-1311 has nine connectors altogether:
- one detachable connector for the motor
- one detachable connector for the corresponding encoder input
- one detachable connector for the reference switches
- two detachable I/O connectors
- one detachable power connector
- one mini-USB connector
- one connector for RS485 and CAN
- one detachable connector for external step/direction in
Encoder
Reference
switches
Motor
Power
CAN
/
RS
485
USB
Step/
Dir IN
I
/
O
connector
0
I
/
O
connector
1
Figure 3.2 TMCM-1311 connectors
OVERVIEW OF CONNECTOR AND MATING CONNECTOR TYPES
Label
Connector type
Mating connector type
Power connector
JST B3P-VH
(JST VH series, 3pins, 3.96mm pitch)
Connector housing: JST VHR-3N
Contacts: JST SVH-21T-P1.1
Wire: 0.83mm
2
, AWG 18
Motor connector
JST B4B-EH-A
(JST EH series, 4pins, 2.5mm pitch)
Connector housing: JST EHR-4
Contacts: JST SEH-001T-P0.6
Wire: 0.33mm
2
, AWG 22
Encoder connector
JST B8B-PH-K-S
(JST PH series, 4pins, 2mm pitch)
Connector housing: JST PHR-8
Contacts: JST SPH-002T-P0.5S
Wire: 0.22mm
2
, AWG 24
Reference switch
connector
JST B4B-PH-K-S
(JST PH series, 4pins, 2mm pitch)
Connector housing: JST PHR-4
Contacts: JST SPH-002T-P0.5S
Wire: 0.22mm
2
, AWG 24
Step/Dir In
connector
JST B4B-PH-K-S
(JST PH series, 4pins, 2mm pitch)
Connector housing: JST PHR-4
Contacts: JST SPH-002T-P0.5S
Wire: 0.22mm
2
, AWG 24
I/O connector 0 + 1
JST B10B-PH-K-S
(JST PH series, 10pins, 2mm pitch)
Connector housing: JST PHR-10
Contacts: JST SPH-002T-P0.5S
Wire: 0.22mm
2
, AWG 24
Mini-USB connector
Mini USB Type B vertical receptacle
Any standard mini-USB plug
CAN / RS485
connector
Male D-SUB 9-pin
Any standard D-SUB female 9-pin
Table 3.1 Connectors and mating connectors, contacts and applicable wire