User Manual

TMCM-1276 Hardware Manual • Hardware Version V1.10 | Document Revision V1.00 • 2018-JUN-25
15 / 20
6.4 Functional Characteristics
Parameter Description / Value
Control CAN bus interface and four digital inputs for referencing, incremental en-
coder, and NOT_ENABLE
Communication CAN bus interface for control and configuration, 20. . . 1000kBit/s
Driving Mode spreadCycle, stealthChop, and constant T
off
chopper, adaptive current
control via stallGuard2 and coolstep
Stepping Resolution Full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 step
Table 11: Functional Characteristics
6.5 Other Requirements
Specifications Description or Value
Cooling Free air
Working environment Avoid dust, water, oil mist and corrosive gases, no condensation, no frosting
Working temperature -30° C to +50° C
Table 12: Other Requirements and Characteristics
7 Abbreviations used in this Manual
Abbreviation Description
CAN Controller Area Network
IDE Integrated Development Environment
LED Light Emmitting Diode
RMS Root Mean Square value
TMCL TRINAMIC Motion Control Language
TTL Transistor Transistor Logic
UART Universal Asynchronous Receiver Transmitter
USB Universal Serial Bus
Table 13: Abbreviations used in this Manual
©2018 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com