User Manual

TMCM-1276 TMCL
™
Firmware Manual • Firmware Version V1.13 | Document Revision V1.01 • 2019-MAR-20
26 / 100
Binary Form of MVP COORD, 0, 8
Field Value
Target address 01
h
Instruction number 04
h
Type 02
h
Motor/Bank 00
h
Value (Byte 3) 00
h
Value (Byte 2) 00
h
Value (Byte 1) 00
h
Value (Byte 0) 08
h
Checksum 0F
h
Note
Before moving to a stored coordinate, the coordinate has to be set using an SCO,
CCO or ACO command.
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com