User Manual

TMCM-1270 TMCL

™

Firmware Manual • Firmware Version V1.00 | Document Revision V1.0 • 2017-Mar-02

82 / 87

This example provides three very simple TMCL routines. They can be called from a host by issuing a run

command with address 0 to call the ﬁrst function, or a run command with address 1 to call the second

function, or a run command with address 2 to call the third function. You can see the addresses of the

TMCL labels (that are needed for the run commands) by using the ”Generate symbol ﬁle function” of the

TMCL-IDE.

Terms of delivery and rights to technical change reserved.

Download newest version at www.trinamic.com

Read entire documentation.