User Manual

TMCM-1270 TMCL
™
Firmware Manual • Firmware Version V1.00 | Document Revision V1.0 • 2017-Mar-02
53 / 87
Reply in Direct Mode
Field Value
Target address 01
h
Host address 02
h
Status 64
h
(100)
Command 8A
h
(138)
Value (Byte 3) 00
h
Value (Byte 2) 00
h
Value (Byte 1) 00
h
Value (Byte 0) Motor bit mask
Checksum depends also on motor bit mask
Additional Reply after Motor has reached Target Position
Field Value
Target address 01
h
Host address 02
h
Status 80
h
(128)
Command 8A
h
(138)
Value (Byte 3) 00
h
Value (Byte 2) 00
h
Value (Byte 1) 00
h
Value (Byte 0) Motor bit mask
Checksum depends also on motor bit mask
©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com
Read entire documentation.