User Manual

TMCM-1260 Hardware Manual • Hardware Version V1.10 | Document Revision V1.20 • 2018-05-17
26 / 30
13 Figures Index
1 Board dimensions, position of mount-
ing holes and position (pin 1) of con-
nectors (all values in mm) . . . . . . . 7
2 TMCM-1260 connectors . . . . . . . . 8
3 TMCM-1260 LEDs . . . . . . . . . . . . 12
4 Reset to factory default settings . . . 13
5 Analog input IN0 . . . . . . . . . . . . 14
6 Digital inputs IN1 and IN2 . . . . . . . 15
7 Stop switch inputs . . . . . . . . . . . 15
8 External encoder input . . . . . . . . . 16
9 Step/Direction input . . . . . . . . . . 16
10 RS485 bus structure with termination
resistors . . . . . . . . . . . . . . . . . 17
11 RS485 bus lines with resistor (bias) net-
work on one side, only . . . . . . . . . 18
12 RS485 bus lines with Profibus ™ recommended
line termination . . . . . . . . . . . . . 18
13 CAN bus structure with termination
resistors . . . . . . . . . . . . . . . . . 19
14 TMCM-1260 block diagram . . . . . . 22
©2018 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com