User Manual

TMCM-1240 CANopen
®
Firmware Manual • Firmware Version V3.22 | Document Revision V1.01 • 2018-DEC-03
60 / 118
Object Description
Index Name Object Type Data Type
2707
h
CAN Bit Rate Load Variable UNSIGNED8
Table 172: Object Description (2707
h
)
Entry Description
Sub-index Access PDO Mapping Value Range Default Value
0 ro no 20. . . 1000 depends on bit rate
Table 173: Entry Description (2707)
h
4.2.59 Object 2708
h
: Node ID Load
This object shows the selected node ID.
Object Description
Index Name Object Type Data Type
2708
h
Node ID Load Variable UNSIGNED8
Table 174: Object Description (2708
h
)
Entry Description
Sub-index Access PDO Mapping Value Range Default Value
0 ro no 1..127 Depends on node ID setting
Table 175: Entry Description (2708
h
)
4.2.60 Object 270E
h
: Device Analog Inputs
This object shows the values of the analog inputs of the device.
Object Description
Index Name Object Type Data Type
270E
h
Device Analog Inputs Array UNSIGNED32
Table 176: Object Description (270E
h
)
©2018 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com