User Manual

TMCM-1140 Hardware Manual (Rev. 1.01 / 2012-JUL-27) 5
www.trinamic.com
2 Order Codes
Order code
Description
Size (mm
3
)
TMCM-1140-option
Single axis bipolar stepper motor controller / driver electronics with
integrated sensOstep encoder and coolStep feature
37 x 37 x 11.5
Table 2.1 Order codes
The following options are available:
Firmware option
Description
Order code example:
-TMCL
Module pre-programmed with TMCL firmware
TMCM-1140-TMCL
Table 2.2 Firmware options
A cable loom set is available for this module:
Order code
Description
TMCM-1140-CABLE
Cable loom for TMCM-1140:
- 1x cable for power and communication connector (length 200mm)
- 1x cable for multipurpose In/Out connector (length 200mm)
- 1x cable for motor connector (length 200mm)
- 1x USB type A connector to mini-USB type B connector cable (length 1.5m)
Table 2.2 Cable loom order codes
Please note that the TMCM-1140 is available with NEMA17 stepper motors, too. Refer to the PD-1140
documents for more information about these products.