Datasheet

TMCM-0010-OPC Hardware/Firmware Manual • Hardware Version V1.10 | Document Revision V1.00 • 2019-Apr-10
4 / 21
4 Connectors and LEDs
Figure 2: TMCM-0010-OPC connectors
4.1 Power and Supply Connector
The supply connector is of type Metz Connect 31349102 in 5mm pitch.
The mating female connector is Metz Connect 31330102.
Pin no. Pin name Description
1 GND Supply ground
2 +V
Supply
Supply voltage +9V to +48V DC
Table 2: Power and supply connector
4.2 Brake Resistor Connector
The supply connector is of type Metz Connect 31182102 in 3,5mm pitch.
The mating female connector is Metz Connect 31169102.
Pin no. Pin name Description
1 +V
Supply
Supply voltage output to first (upper) terminal of brake resistor
2 BRAKE Connection to second (lower) terminal of brake resistor
Table 3: Brake resistor connector
4.3 Trigger Output Header
The trigger output is a simple 2-pin header in standard 0.1" pitch.
Pin no. Pin name Description
1 GND Supply ground
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com