Datasheet

TMCM-0010-OPC Hardware/Firmware Manual • Hardware Version V1.10 | Document Revision V1.00 • 2019-Apr-10

3 / 21

1 Features

TMCM-0010-OPC is a simple over-voltage protection module that helps to limit a voltage rail at a conﬁg-

urable maximum level. The voltage is limited by switching a resistive load (brake resistor) connected to the

module. The module can be conﬁgured via USB using Trinamic’s TMCL-IDE.

• Supply Voltage +9V to +48V DC

• Supply rail monitoring with external brake resistor

• Active limitation of supply rail to a conﬁgured maximum value

• Trigger output as feedback to control system

• USB interface for conﬁguration and ﬁrmware updates via bootloader

• TMCL-based protocol for online conﬁguration and permanent parameter settings

2 Order Codes

Order Code Description Size (LxWxH)

TMCM-0010-OPC

Over-voltage protection module, supply input, external brake re-

sistor connector, USB conﬁguration interface

45x39x9 (mm)

Table 1: Order codes

3 Mechanical Information

The size of TMCM-0010-OPC is approximately 45mm x 39mm. There are 4 mounting holes for M3 screws

for mounting the TMCM-0010-OPC to a carrier board or heat sink (highlighted in green). The maximum

component height is 9mm.

Figure 1: TMCM-0010-OPC top view mechanical dimensions

Terms of delivery and rights to technical change reserved.

Download newest version at www.trinamic.com