Datasheet

TMCM-0010-OPC Hardware/Firmware Manual • Hardware Version V1.10 | Document Revision V1.00 • 2019-Apr-10
16 / 21
6 Operational Ratings and Characteristics
6.1 Absolute Maximum Ratings
Parameter Min Max Unit
Supply voltage +9 +60 V
Max. ADC measurement range +60 V
Working temperature -30 +40 ° C
NOTICE
Never Exceed the absolute maximum ratings! Stresses above those listed un-
der "‘Absolute Maximum Ratings"’ may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at those or any
other conditions above those indicated in the operation listings of this specifica-
tion is not implied. Exposure to maximum rating conditions for extended periods
may affect device reliability.
6.2 Electrical Characteristics (Ambient Temperature 25° C)
Parameter Symbol Min Typ Max Unit
Supply voltage V DD +9 +48 V
Power consumption P 37 38 mW
Supply current draw at 24V I
V
DD 1.54 1.56 mA
Table 11: Electrical Characteristics
6.3 Other Requirements
Specifications Description or Value
Cooling Free air or heat sink mounted
Working environment Avoid dust, water, oil mist and corrosive gases, no condensation, no frosting
Working temperature -30° C to +40° C
Table 12: Other Requirements and Characteristics
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com