User Manual

TMCC160 TMCL Firmware Version 2.11 • 2018-FEB-08 | Document Revision 1.01 • 2018-FEB-08
29/57
© 2015 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany — Terms of delivery and rights
to technical change reserved. Download newest version at: www.trinamic.com .
Read entire documentation; especially the 6 “Supplemental Directives” (page 51).
Axis Parameter Description (Numbers 1- …254)
Number
Axis
Parameter
Description
Range [Unit]
Access
254
Hall sensor
invert
1: Invert the hall scheme
0/1
RWE
Table 57: Axis Parameter Description (Numbers 1 …254)