User Manual

ManualsBrandsTrinamic ManualsDriversMotionCookie BLDC / PMSM Servo Controller, CANopen 1A 24V LGA

Cookie for BLDC/PMSM Motors

TMCC160 CANopen

Firmware Manual

Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29

The CANopen Firmware is used in combination with the integrated TMCC160 motionCookie

microsystem with 3-Phase BLDC/PMSM gate driver for up to 24V and 1A gate current.

Features

•

Single axis ﬁeld oriented control for

BLDC/PMSM motor

•

Digital Hall and ABN encoder sup-

port

• 28V DC supply voltage

• RS232/RS485 & CAN interface

•

CANopen CiA 402 drive proﬁle for

Torque, Velocity, and Position

control

Applications

• Life Sciences • Test & Measurement • Robotics / Automation

Simpliﬁed Block Diagram

Microcontroller

UART

CAN

SPI1

AIN

Gatedriver

PWM

DIAG

Current

TMCC160

Ref.

Switches

DC/DC

(3.3V)

Motor

Optional HALL

HSx, LSx, BMx

Power Bridge

EEPROM

SPI0

3.3V

Host PC

microcontroller

Optional Brake Circuit

Encoder

I_U, I_V

Terms of delivery and rights to technical change reserved.

Download newest version at: www.trinamic.com

Read entire documentation.

Summary of content (86 pages)

PAGE 1
COOKIE Cookie for BLDC/PMSM Motors TMCC160 CANopen® Firmware Manual Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 The CANopen Firmware is used in combination with the integrated TMCC160 motionCookieTM microsystem with 3-Phase BLDC/PMSM gate driver for up to 24V and 1A gate current.
PAGE 2
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 2 / 86 Contents 1 Preface 1.1 General Features of this CANopen Implementation . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Abbreviations used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Firmware Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Communication 2.1 Reference Model . 2.2 NMT State Machine 2.
PAGE 3
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 4.1.17 4.1.18 4.1.19 4.1.20 4.1.21 4.1.22 4.1.23 Object 2702h : Object 2704h : Object 2705h : Object 2706h : Object 2707h : Object 2708h : Object 270Eh : Digital Inputs . . . CAN Bit Rate . . . Node ID . . . . . . Store . . . . . . . CAN Bit Rate Load Node ID Load . . Analog Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 4 / 86 8 Homing mode 8.1 Homing Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1.1 Homing Method 17 and 18: Homing without Index Pulse 8.1.2 Homing Method 35: Current Position as Home Position . 8.2 Detailed Object Speciﬁcations . . . . . . . . . . . . . . . . . . . . . 8.2.1 Object 6040h : Control Word . . . . . . . . . . . . . . . . . . 8.2.2 Object 6041h : Status Word . . . . . . . . . .
PAGE 5
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 1 5 / 86 Preface This document speciﬁes objects and modes of operation of the Trinamic TMCC160 BLDC/PMSM motor control module with CANopen ﬁrmware. The CANopen ﬁrmware is designed to fulﬁll the CANopen DS402 and DS301 standards. This manual assumes that the reader is already familiar with the basics of the CANopen protocol, deﬁned by the DS301 and DS402 standards of the CAN-CiA.
PAGE 6
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 Further Characteristics • SYNC: consumer (TPDOs 3 are synchronous PDOs) • Emergency: producer • RTR: supported only for node guarding/life guarding • Heartbeat: consumer and producer ©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany Terms of delivery and rights to technical change reserved. Download newest version at www.trinamic.com Read entire documentation.
PAGE 7
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 1.
PAGE 8
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 2 2.1 8 / 86 Communication Reference Model The application layer comprises a concept to conﬁgure and communicate real-time-data as well as the mechanisms for synchronization between devices. The functionality which the application layer offers to an application is logically divided over different service data objects (SDO) in the application layer.
PAGE 9
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 9 / 86 Service Types Type Deﬁnition Local service Involves only the local service object. The application issues a request to its local service object that executes the requested service without communicating with peer service object(s). Unconﬁrmed service Involves one or more peer service objects. The application issues a request to its local service object.
PAGE 10
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 2.2 10 / 86 NMT State Machine The ﬁnite state machine (FSM) or simply state machine is a model of behavior composed of a ﬁnite number of states, transitions between those states, and actions. It shows which way the logic runs when certain conditions are met. Starting and resetting the device is controlled via the state machine. The NMT state machine consists of the states shown in ﬁgure 1.
PAGE 11
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 11 / 86 CANopen device profile CiA DSP 402 Modes of operation: Profile Position (pp) Profile Velocity (pv) Homing (hm) ... Device control state machine CANopen Communication Profile CiA DS301 NMT State Machine CAN Figure 2: Communication Architecture 2.
PAGE 12
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 12 / 86 Application Communication Object dictionary State machine Application object Entry 1 Entry 2 Communication object Communication object Application object Communication object Application object Entry n Application object Communication object Bus system Process Figure 3: Device Model 2.4 Object Dictionary The most important part of a device proﬁle is the object dictionary description.
PAGE 13
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 13 / 86 The communication proﬁle area at indices 1000h through 1FFFh contains the communication speciﬁc parameters for the CAN network. These entries are common to all devices. The manufacturer segment at indices 2000h through 5FFFh contains manufacturer speciﬁc objects. These objects control the special features of the Trinamic TMCC160 motion control device.
PAGE 14
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 14 / 86 Entry Description Sub-index Access PDO Mapping Value Range Default Value 0 ro no UNSIGNED8 0 Table 8: Entry Description (1001h ) Error Register Bits Bit Deﬁnition 0 Generic error 1 Current 2 Voltage 3 Temperature 4 Communication error 5 Device proﬁle speciﬁc 6 Reserved (always 0) 7 Manufacturer speciﬁc Table 9: Error Register Bits 3.1.
PAGE 15
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 Entry Description Sub-index Access PDO Mapping Value Range Default Value 0 rw no UNSIGNED32 80h Table 12: Entry Description (1005h ) 3.1.4 Object 1008h : Manufacturer Device Name This object contains the manufacturer device name.
PAGE 16
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 16 / 86 Object Description Index Name Object Type Data Type 100Ah Manufacturer Software Version Variable Visible String Table 17: Object Description (100Ah ) Entry Description Sub-index Access PDO Mapping Value Range Default Value 0 ro no — Depends on device, e.g. 1.0. Table 18: Entry Description (100Ah ) 3.1.
PAGE 17
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 17 / 86 Entry Description Sub-index Access PDO Mapping Value Range Default Value 0 rw no UNSIGNED8 0 Table 22: Entry Description (100Dh ) 3.1.9 Object 1010h : Store Parameters This object supports the saving of parameters in non volatile memory. By read access the device provides information about its saving capabilities.
PAGE 18
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 18 / 86 Entry Description Sub-index Description Access PDO Mapping Value Range Default Value 01h Save all parameters rw no UNSIGNED32 — 02h Save communication parameters rw no UNSIGNED32 — 03h Save device proﬁle parameters rw no UNSIGNED32 — 04h Save motor axis 0 parameters rw no UNSIGNED32 — Table 25: Entry Description (1010h ) 3.1.
PAGE 19
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.
PAGE 20
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 20 / 86 Entry Description Sub-index Access PDO Mapping Value Range Default Value 0 rw no UNSIGNED16 0 Table 32: Entry Description (1015h ) 3.1.13 Object 1016h : Consumer Heartbeat Time The consumer heartbeat time deﬁnes the expected heartbeat cycle time and thus has to be higher than the corresponding producer heartbeat time conﬁgured on the module producing this heartbeat.
PAGE 21
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 21 / 86 Object Description Index Name Object Type Data Type 1017h Producer heartbeat time Variable UNSIGNED16 Table 36: Object Description (1017h ) Entry Description Sub-index Access PDO Mapping Value Range Default Value 0 rw no UNSIGNED16 0 Table 37: Entry Description (1017h ) 3.1.
PAGE 22
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.
PAGE 23
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.
PAGE 24
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 24 / 86 Entry Description Sub-index Description Access Value Range Default Value 00h Number of mapped application objects in PDO rw 0. . .
PAGE 25
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.
PAGE 26
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.
PAGE 27
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 This object is organized bit-wise.
PAGE 28
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 Entry Description Sub- PDO index Name Mapping Min Max Default Unit Access 0 Supply Voltage no 0 1000 300 [100mV] R Table 53: Entry Description (200Eh ) 4.1.3 Object 200Fh : Driver Temperatur The actual temperature of the motor driver.
PAGE 29
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 4.1.
PAGE 30
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 4.1.
PAGE 31
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.
PAGE 32
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 32 / 86 Entry Description Sub- PDO index Name Mapping Min Max Default 0 Velocity Ramp Mode no 0 1 1 Unit Access RW Table 69: Entry Description (2056h ) 4.1.
PAGE 33
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 4.1.
PAGE 34
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 4.1.
PAGE 35
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 35 / 86 Object Description Index Name Object Type Data Type 2702h Digital Inputs Variable UNSIGNED32 Table 82: Object Description (2702h ) Entry Description Sub- PDO index Name Mapping Min Max Default 0 Digital Inputs no 0 7 0 Unit Access R Table 83: Entry Description (2702h ) 4.1.18 Object 2704h : CAN Bit Rate With this object it is possible to change the CAN bit rate.
PAGE 36
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 36 / 86 Object Description Index Name Object Type Data Type 2705h Node ID Variable UNSIGNED8 Table 86: Object Description (2705h ) Entry Description Sub- PDO index Name Mapping Min Max Default 0 Node ID no 1 127 1 Unit Access RW Table 87: Entry Description (2705h ) 4.1.
PAGE 37
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 Entry Description Sub- PDO index Name Mapping Min Max Default 0 CAN Bit Rate Load no 20 1000 1000 Unit Access R Table 91: Entry Description (2707h ) 4.1.22 Object 2708h : Node ID Load This object shows the selected node ID.
PAGE 38
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.
PAGE 39
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 39 / 86 Object Description Index Name Object Type Data Type 605Ah Quick Stop Option Code Variable SIGNED16 Table 96: Object Description (605Ah ) Entry Description Sub- PDO index Name Mapping Min Max Default 0 Quick Stop Option Code no 1 6 0 Unit Access RW Table 97: Entry Description (605Ah ) 5.1.
PAGE 40
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 40 / 86 Object Description Index Name Object Type Data Type 605Ch Disable Operation Option Code Variable SIGNED16 Table 100: Object Description (605Ch ) Entry Description Sub- PDO index Name Mapping Min Max Default 0 Disable Operation Option Code no 1 1 1 Unit Access RW Table 101: Entry Description (605Ch ) 5.1.
PAGE 41
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 41 / 86 Object Description Index Name Object Type Data Type 605Eh Fault Reaction Option Code Variable SIGNED16 Table 104: Object Description (605Eh ) Entry Description Sub- PDO index Name Mapping Min Max Default 0 Fault Reaction Option Code no 2 2 2 Unit Access RW Table 105: Entry Description (605Eh ) 5.1.
PAGE 42
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.
PAGE 43
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 43 / 86 Object Description Index Name Object Type Data Type 6099h Homing Speeds Array UNSIGNED32 Table 112: Object Description (6099h ) Entry Description Sub- PDO index Name Mapping Min Max Default Unit Access 1 Fast Homing Speed no 0 4294967295 0 RW 2 Slow Homing Speed no 0 4294967295 0 RW Table 113: Entry Description (6099h ) 5.1.
PAGE 44
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.
PAGE 45
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.
PAGE 46
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 46 / 86 Structure of the Control Word 15 11 10 9 8 7 r oms h fr nu 6 4 oms 3 2 1 0 eo qs ev so MSB LSB Legend: nu=not used; r=reserved; oms=operation mode speciﬁc; h=halt; fr=fault reset; eo=enable operation; qs=quick stop; ev=enable voltage; so=switch on.
PAGE 47
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 47 / 86 Entry Description Sub-index Access PDO Mapping Value Range Default Value 0 rw see CiA402-3 See command coding above. Table 122: Entry Description (6040h in pp Mode) 6.2.2 Object 6041h : Status Word This object provides the status of the PDS FSA. It reﬂects the status of the CiA-402 state machine. Please refer to ﬁgure 4 for detailed information. The object is structured as deﬁned below.
PAGE 48
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.
PAGE 49
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 49 / 86 Entry Description Sub- PDO index Name Mapping Min Max Default 0 Position Demand Value no -2147483648 2147483647 0 Unit Access R Table 130: Entry Description (6062h ) 6.2.4 Object 6063h : Position Actual Internal Value This object provides the actual position value of the motor.
PAGE 50
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 6.2.6 50 / 86 Object 6067h : Position Window This object indicates the conﬁgured symmetrical range of accepted positions relative to the target position. If the actual value of the position encoder is within the position window, this target position is regarded as having been reached. The value is given in increments.
PAGE 51
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 51 / 86 Object Description Index Name Object Type Data Type 607Ah Target Position Variable SIGNED32 Table 139: Object Description (607Ah ) Entry Description Sub- PDO index Name Mapping Min Max Default 0 Target Position no -2147483648 2147483647 0 Unit Access RW Table 140: Entry Description (607Ah ) 6.2.
PAGE 52
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 52 / 86 Object Description Index Name Object Type Data Type 6081h Proﬁle Velocity (pp) Variable UNSIGNED32 Table 143: Object Description (6081h ) Entry Description Sub- PDO index Name Mapping Min Max Default Unit Access 0 Proﬁle Velocity no 0 200000 0 [rpm] RW Table 144: Entry Description (6081h ) 6.2.
PAGE 53
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 53 / 86 Entry Description Sub- PDO index Name Mapping Min Max Default Unit Access 0 Proﬁle Acceleration no 0 100000 2000 [rpm/s] RW Table 148: Entry Description (6083h ) 6.2.13 Object 6084h : Proﬁle Deceleration This object indicates the conﬁgured deceleration.
PAGE 54
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 6.3 54 / 86 How to move a Motor in pp Mode Here is a little example that shows how to get a motor running in pp mode. In this little example we assume that the module has been reset (and then switched to pre-operational or operational) by NMT commands before. Please note that the values are decimal.
PAGE 55
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 7 55 / 86 Proﬁle Velocity Mode The proﬁle velocity mode is used to control the velocity of the drive without a special regard of the position. It contains limit functions and trajectory generation. The proﬁle velocity mode covers the following sub-functions: • Demand value input via trajectory generator. • Monitoring of the proﬁle velocity using a window-function.
PAGE 56
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.
PAGE 57
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 Trinamic Speciﬁc Bits Bit Name Deﬁnition 14 Motor activity 0: Motor stands still. 1: Motor rotates. 15 Direction of rotation This bit shows the direction of rotation. Table 158: Trinamic Speciﬁc Bits Operation Mode speciﬁc Bits in pv Mode Bit Name Deﬁnition 10 Target reached Indicates that the target speed has been reached. 12 Speed Not supported. 13 Max. slippage error Not supported.
PAGE 58
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 58 / 86 Entry Description Sub-index Access PDO Mapping Value Range Default Value 0 rw see CiA402-3 See state coding above Table 162: Entry Description (6041h in pv Mode) 7.1.3 Object 6062h : Position Demand Value This object provides the demanded position value. The value is given in hall or encoder steps. Object 6062h indicates the actual position that the motor should have.
PAGE 59
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 7.1.5 59 / 86 Object 6064h : Position Actual Value This object provides the actual value of the position measurement device. It always contains the same value as object 6063h.
PAGE 60
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.
PAGE 61
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 61 / 86 Entry Description Sub- PDO index Name Mapping Min Max Default Unit Access 0 Quick Stop Deceleration no 0 100000 2000 [rpm/s] RW Table 176: Entry Description (6085h ) 7.1.10 Object 60FFh : Target Velocity This object indicates the conﬁgured target velocity and is used as input for the trajectory generator. Object 60FFh sets the target velocity when using proﬁle velocity mode.
PAGE 62
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 7.2 62 / 86 How to move a Motor in pv Mode Here is a little example that shows how to get a motor running in pv mode. In this little example we assume that the module has been reset (and then switched to pre-operational or operational) by NMT commands before. • Select pv mode by writing 3 to object 6060h (Modes_of_Operation). • Write 6 to object 6040h (Controlword) to switch to READY_TO_SWITCH_ON state.
PAGE 63
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 8 63 / 86 Homing mode This chapter describes the method by which a drive seeks the home position (reference point). There are various methods of achieving this using limit switches at the ends of travel or a home switch in mid-travel. Some methods also use the index (zero) pulse train from an incremental encoder. The user may specify the speeds, acceleration and the method of homing.
PAGE 64
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 8.1 64 / 86 Homing Methods The TMCC160 supports a subset of different standard CANopen homing methods. The homing method that is to be used can be choosen via object 6098h (section 8.2.5). Supported Homing Methods Method Description 0 No homing (default value for object 6098h ). 17 Search the left end switch. 18 Search the right end switch. 35 The actual position is used as home position.
PAGE 65
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 8.2 8.2.1 65 / 86 Detailed Object Speciﬁcations Object 6040h : Control Word This object indicates the received command controlling the power drive system ﬁnite state automaton (PDS FSA). The CiA-402 state machine can be controlled using this object. Please refer to ﬁgure 4 for detailed information.
PAGE 66
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 66 / 86 Object Description Index Name Object Type Data Type 6040h Controlword Variable UNSIGNED16 Table 184: Object Description (6040h in hm Mode) Entry Description Sub-index Access PDO Mapping Value Range Default Value 0 rw see CiA402-3 See command coding above. Table 185: Entry Description (6040h in hm Mode) 8.2.2 Object 6041h : Status Word This object provides the status of the PDS FSA.
PAGE 67
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 Operation Mode speciﬁc Bits in hm Mode Bit Name Deﬁnition 10 Target reached Set when the zero position has been found or homing has been stopped by setting controlword bit 4 to zero. 12 Home attained Set when zero position has been found. 13 Homing error Not supported.
PAGE 68
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 68 / 86 Object Description Index Name Object Type Data Type 606Ch Velocity Actual Value Variable SIGNED32 Table 192: Object Description (606Ch ) Entry Description Sub- PDO index Name Mapping Min Max Default Unit Access 0 Velocity Actual Value no -2147483648 2147483647 0 [rpm] R Table 193: Entry Description (606Ch ) 8.2.
PAGE 69
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 69 / 86 Entry Description Sub- PDO index Name Mapping Min Max Default 0 Homing Method no 0 35 0 Unit Access RW Table 197: Entry Description (6098h ) 8.2.6 Object 6099h : Homing Speeds This object indicates the conﬁgured speeds used during fast and slow homing procedure. In most homing modes, the home switch is searched with the fast speed ﬁrst.
PAGE 70
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 70 / 86 Entry Description Sub- PDO index Name Mapping Min Max Default Unit Access 0 Homing Acceleration no 0 100000 2000 [rpm/s] RW Table 201: Entry Description (609Ah ) 8.2.8 Object 2100h : Home Offset Display This object shows the home offset. The value is given in encoder or hall increments.
PAGE 71
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 8.3 71 / 86 How to start a Homing in hm Mode Here is a little example that shows how to home the motor in hm mode. In this little example we assume that the module has been reset (and then switched to pre-operational or operational) by NMT commands before. The home switch must be connected to the home switch input. It can be operated manually. • Select hm mode by writing 6 to object 6060h .
PAGE 72
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 9 72 / 86 Cyclic synchonous Torque Mode The cyclic synchronous torque mode is used to directly control the torque of the motor, without the need for position or velocity control. It contains limit functions, but not a trajectory generator. The cyclic synchronous torque mode covers the following sub-functions: • Demand value input directly via an object. • Monitoring of the torque.
PAGE 73
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 73 / 86 Object Description Index Name Object Type Data Type 6040h Controlword Variable UNSIGNED16 Table 206: Object Description (6040h in cst Mode) Entry Description Sub-index Access PDO Mapping Value Range Default Value 0 rw see CiA402-3 See command coding above. Table 207: Entry Description (6040h in cst Mode) 9.1.
PAGE 74
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 Operation Mode speciﬁc Bits in cst Mode Bit Name Deﬁnition 10 Reserved Not used. 12 Target torque ignored 0: Target torque ignored. 1: Target torque used as input to control loop. 13 Reserved Not used.
PAGE 75
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 75 / 86 Object Description Index Name Object Type Data Type 6071h Target Torque Variable SIGNED32 Table 214: Object Description (6071h ) Entry Description Sub- PDO index Name Mapping Min Max Default Unit Access 0 Target Torque no -90000 90000 0 [mA] RW Table 215: Entry Description (6071h ) 9.1.4 Object 6077h : Torque Actual Value The actual motor current.
PAGE 76
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 76 / 86 Entry Description Sub- PDO index Name Mapping Min Max Default 0 Torque offset no -2147483648 2147483647 0 Table 219: Entry Description (60B2h ) ©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany Terms of delivery and rights to technical change reserved. Download newest version at www.trinamic.com Read entire documentation.
PAGE 77
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 9.2 77 / 86 How to move a Motor in cst Mode Here is a little example that shows how to get a motor running in cst mode. In this little example we assume that the module has been reset (and then switched to start) by NMT commands before. • If you do not have any limit switches connected, ﬁrst disable the limit switch inputs by writing 3 to object 2005h . • Select cst mode by writing 10 to object 6060h .
PAGE 78
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 10 78 / 86 Emergency Messages (EMCY) The module sends an emergency message if an error occurs. The message contains information about the error type. The module can map internal errors and object 1001h (error register) is part of every emergency object.
PAGE 79
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 Error code Additional byte 79 / 86 Description 1 2 3 4 5 8110h 1 255 0 0 0 CAN controller overﬂow The receive message buffer of the CAN controller hardware is full and some CAN messages are lost. 8110h 2 255 0 0 0 CAN Tx buffer overﬂow The software CAN transmit buffer is full and thus some CAN messages are lost.
PAGE 80
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 11 1 2 3 80 / 86 Figures Index NMT State Machine . . . . . . . . . . . Communication Architecture . . . . . Device Model . . . . . . . . . . . . . . 10 11 12 ©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany Terms of delivery and rights to technical change reserved. Download newest version at www.trinamic.com Read entire documentation. 4 DS402 Finite State Machine . . . . . .
PAGE 81
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 12 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 81 / 86 Tables Index Abbreviations used in this Manual Service Primitives . . . . . . . . . . Service Types . . . . . . . . . . . . Object Dictionary . . . . . . . . . . Object Description (1000h ) . . . . . Entry Description (1000h ) . . . . .
PAGE 82
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 Entry Description (605Eh ) . . . . . . . Object Description (6060h ) . . . . . . . Entry Description (6060h ) . . . . . . . Object Description (6061h ) . . . . . . . Entry Description (6061h ) . . . . . .
PAGE 83
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 207 208 209 210 211 212 213 214 Entry Description (6040h in cst Mode) Structure of the Status Word in cst Mode Trinamic Speciﬁc Bits . . . . . . . . . . Operation Mode speciﬁc Bits in cst Mode State Coding . . . . . . . . . . . . . . . Object Description (6041h in cst Mode) Entry Description (6041h in cst Mode) Object Description (6071h ) . . . . . . .
PAGE 84
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 13 84 / 86 Supplemental Directives 13.1 Producer Information 13.2 Copyright TRINAMIC owns the content of this user manual in its entirety, including but not limited to pictures, logos, trademarks, and resources. © Copyright 2017 TRINAMIC. All rights reserved. Electronically published by TRINAMIC, Germany.
PAGE 85
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 85 / 86 or of any other nature are made hereunder with respect to information/speciﬁcation or the products to which information refers and no guarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or areas of applications of the product.
PAGE 86
TMCC160 CANopen® Firmware Manual • Firmware Version V3.00 | Document Revision V1.00 • 2017-Aug-29 14 14.1 Revision History Firmware Revision Version Date Author Description 3.00 29.08.2017 ED First release. Table 221: Firmware Revision 14.2 Document Revision Version Date Author Description 1.00 29.08.2017 ED First release. Table 222: Document Revision ©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany Terms of delivery and rights to technical change reserved.