User Manual

TMCC160 TMCL Hardware Version 1.1 | Document Revision 1.0
2 • 2017-OCT-06 7/16
© 2015 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
— Terms of delivery and rights
to technical change reserved. Download new
est version at: www.trinamic.com .
Read entire documentation; especially the Supplemental Directives.
Interface Connector
Pin
Label
Description
44
GND
System ground.
Table 7: Interface Connector
1.2 LEDs
The TMCC160-EVAL has three LEDs. Two of them indicate the digital 3.3V (LED1) and 5V (LED2) power
supply. The third LED is connected with the brake chopper output pin. Whenever the brake chopper is active
LED3 is on.
Figure 4: LEDs